akpzoom.blogg.se - Como instalar la ffmpeg library

To use a WiFi adapter with the Raspberry Pi follow the instructions below: You should see see something like this:Ī WiFi adapter can be used to connect the Raspberry Pi to the internet.

Next, open SD Formatter ( The program that you just installed).

When prompted with the SDFormatter InstallShield Wizard accept and install the program, then click finish.

Unzip and extract the Download and run Setup.exe.

Go online and Download Formatter for Windows.

If you have another one, you can check the steps here: Different OS.Please, follow these instructions:

In this tutorial we are using the OS windows. The first step will be formate the card and the second step will be install the NOOBS software(Your Raspberry will need it). In this section, you are going to use your computer. WiFi connection adapterįirst of all, we are going to format and prepare the SD card.

This tutorial used a Mini 150Mbps USB 2.0 WiFi Antenna Wireless Network LAN Card Adapter 802.11N/G/B.

An Ethernet cable and a connection to an Internet-connected network.If you want to use WiFi in your Raspberry Pi, you can buy a WiFi connection adapter.

At least 8 GB and up to 32 GB of storage.

It can be a phone charger, they work well.

A 5V power supply with a micro USB termination.

These are the materials that you will need to install your Lepton Camera: If you want to know more specifications about the Lepton Camera, you can go on Lepton Datasheetįig 1: Lepton Camera Hardware Required Materials

Building Automation & Presence Detection.

Operability: Number of non-defective pixels Environment Specification Operating Temperature Rangeġ0° C to 65° C (-20° C to 75° C with some possible performance degradation)Īir-to-air across operating temp. It captures infrared radiation input in itsnominal response wavelength band (from 8 to 14microns) and outputs a uniform thermal image. Lepton is a complete long-wave infrared (LWIR)camera module designed to interface easily intonative mobile-device interfaces and other consumerelectronics.

5.3 Setting up a range to the output frame.

5.1 Get the Internal Temperature of the camera.

3.2 FLIR Lepton thermal camera software.